Gigabit Media Converters — Singapore
Industrial Gigabit Media Converters — 1000Base-TX to 1000Base-FX for Long-Distance Industrial Networks
There's a hard ceiling on how far standard copper Ethernet can travel — 100 metres. For a sprawling manufacturing plant, a utility substation, a multi-building campus, or any facility where network points are spread across large distances, 100 metres runs out quickly.
HEPDA's Gigabit Media Converters bridge copper and fibre — converting 10/100/1000Base-TX Ethernet signals into 1000Base-SFP fibre, so your network can stretch over kilometre-scale distances while staying stable at Gigabit speeds.
Our gigabit converter range
Explore HEPDA's Full Gigabit Media Converter Range
Ten models covering industrial DIN-rail, desktop/wall-mount, mini-type, rack-mount, hardened grade and PoE+ / PoE++ variants.
HMC-IDM-G1S
Industrial DIN-Mount Gigabit Media Converter
10/100/1000Base-TX to 1000Base-SFP. DIN-rail. DC 9–56V redundant power. –40°C to +75°C.
HMC-HMT-G1S
Desktop / Wall-Mount Gigabit Media Converter
Micro type. 38.5×117×24.5mm. Wall mount or MR-C10 rack. –40°C to +75°C. DIP switch config.
HMC-HDM-G1S
High-Density DIN-Mount Gigabit Media Converter
Hardened grade. Dual redundant DC9–56V. 10K byte jumbo frames. MTBF >100,000 hours.
HMC-HDM-G1SPp
High-Density Gigabit Media Converter with PoE+
Hardened PoE+. IEEE 802.3at 30W. 6KV ESD. MTBF >300,000 hours. SC connector. Up to 20km.
HMC-IDM-G1NPp
Industrial DIN-Mount Gigabit Media Converter with PoE+
Industrial PoE+. 6KV ESD/EFT. ±4KV surge. 14Gbps switching. 9000-byte jumbo frames.
HMC-HDM-G1SPp9
Hardened Grade Gigabit (PoE++) to 1000Base-SFP Media Converter
HMC-IMI-G1N
Mini-Type 10/100/1000Base-TX to 1000Base-FX Media Converter
HMC-IMI-G1SPp
Mini-Type 10/100/1000Base-TX (PoE+) to 1000Base-FX Media Converter
HMC-IRM-G8S
Industrial Rack-mount 8-port Gigabit to 8-port 1000Base-SFP Media Converter
HMC-IRM-G16S
Industrial Rack-mount 16-port Gigabit to 16-port 1000Base-SFP Media Converter
When to choose a gigabit media converter
Choose a Gigabit media converter when your network runs at 1Gbps and your devices are more than 100m apart, or when you need immunity from electromagnetic interference on a copper link. Choose Fast Ethernet media converters when your switches and field devices run at 100Mbps or below.
Common questions
Frequently Asked Questions
Not sure which gigabit media converter you need?
HEPDA's Singapore-based technical team can review your network architecture and environment and point you in the right direction — at no charge.