Key facts
HUS-IDM-G50S at a glance
| Model | HUS-IDM-G50S |
|---|---|
| Category | Unmanaged Network Switches |
| Ports | 5×10/100/1000BASE-T RJ45 |
| Switch fabric | 14 Gbps, non-blocking |
| Power | DC 9–56V, dual redundant |
| Operating temp. | -40℃ ~ +75℃ |
| Housing | IP40 aluminum, DIN-rail / wall |
| Warranty | 5 Years |
Overview
About the HUS-IDM-G50S
The Hepda HUS-IDM-G50S Series Unmanaged Industrial Ethernet Switch is a robust, budget-friendly solution designed for outdoor CCTV and industrial networking. Engineered to withstand harsh weather conditions, it delivers seamless connectivity ensuring surveillance systems operate flawlessly in demanding environments.
Housed in a compact IP40-rated aluminum enclosure with DIN-rail and wall-mount options, it offers wide DC 9–56V dual redundant power input with −40 to +75°C operating range. The HUS-IDM-G50SPp and HUS-IDM-G50Pp9 variants add IEEE 802.3af/at/bt Power over Ethernet.
Features
Main features
- 5×10/100/1000BASE-T RJ45 ports with Auto-MDI/MDI-X, no crossover cables needed
- Non-blocking store-and-forward switching at full wire-speed (14Gbps fabric)
- DC 9–56V dual redundant power with reverse polarity & overload protection
- Plug and Play design — zero configuration required for instant deployment
- IP40 aluminum case, fanless passive cooling, −40 to +75°C operating range
- PoE variants available (HUS-IDM-G50SPp, HUS-IDM-G50Pp9)
Specifications
Technical specifications
Hardware
| Copper Ports | 5×10/100/1000BASE-T RJ45 (Auto-MDI/MDI-X) |
|---|---|
| Enclosure | IP40 aluminum case |
| Installation | DIN-Rail / Wall-mount |
| Dimension | 120 × 90 × 35 mm |
| Weight | 380g bare / 480g packaged |
| Surge Protection | ±6kV DC; ±4kV RJ45 |
Switching Performance
| Switch Architecture | Store-and-Forward |
|---|---|
| Switch Fabric | 14 Gbps / Non-blocking |
| Forwarding Rate | 7.44 Mpps (64-byte packet) |
| Packet Buffer | 512 Kbits |
| Max. Packet Length | 9K bytes |
| MAC Address Table | 2K entries, auto learning & aging |
| Flow Control | IEEE 802.3x (full duplex) / Back pressure (half duplex) |
Power Supply
| Operating Voltage | DC 9–56V |
|---|---|
| Power Consumption | 6W max |
| Power Connector | 6-contact terminal blocks |
| Protection | Reverse polarity, overload |
Environmental
| Operating Temperature | -40℃ ~ +75℃ (-40 to 167℉) |
|---|---|
| Storage Temperature | -40℃ ~ +85℃ (-40 to 185℉) |
| Operating Humidity | 5% ~ 95% (non-condensing) |
| MTBF | >500,000 hrs @ MIL-HDBK-217F |
| Cooling | Passive cooling, fanless |
LED Indicators
| P1 & P2 (Power) | ON = power supplied; OFF = power not supplied |
|---|---|
| RJ45 Port (Amber) | ON = link active; Blinking = data transmitting; OFF = no link |
| RJ45 Port (Green) | ON = 1000 Mbps; OFF = 10/100 Mbps |
Regulatory & Compliance
| Standard Compliance | IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.3az |
|---|---|
| ISO | Manufactured in ISO-9001 certified facility |
| Safety | IEC 62368-1:2020 + A11:2020 |
| EMI | FCC Part 15B Class A; IEC 61000-3-2 |
| EMS | IEC 61000-4-2 ESD: Contact ±8kV, Air ±15kV; IEC 61000-4-5 Surge: Power ±6kV, RJ45 ±4kV |
| Shock / Free Fall / Vibration | IEC 60068-2-27 / IEC 60068-2-32 / IEC 60068-2-6 |
| Environmental | RoHS 2011/65/EU Annex II (EU) |
| Warranty | 5 Years |
Ordering
Ordering information
| Model | 10/100/1000Base-T RJ45 | PoE Standard | Input Voltage | Operating Temp. |
|---|---|---|---|---|
| HUS-IDM-G50S | 5 | — | 2x DC9-56V | -40 to +75℃ |
| HUS-IDM-G50SPp | 5 | Port 1-4 802.3 af/at | 2x DC9-56V | -40 to +75℃ |
| HUS-IDM-G50Pp9 | 5 | Port 1-4 802.3 af/at/bt | 2x DC9-56V | -40 to +75℃ |
Due to continuous improvement, all product specifications are subject to change without further notice.
Ready to specify?
Our Singapore team will confirm the right specification for your application — at no charge.