Key facts
HMS-HDM-F164SPp at a glance
| Model | HMS-HDM-F164SPp |
|---|---|
| Category | Managed Network Switches |
| Ports | 16x Gigabit RJ45 (PoE+) + 4x 100/1000 SFP |
| PoE | IEEE 802.3af/at, 30W per port, 240W budget |
| Switching | 56Gbps fabric, L2+ managed |
| Ring | ITU-T G.8032 ERPS, < 10ms |
| Operating temp. | -40℃ ~ 75℃ |
| Housing | IP40 aluminum, DIN-rail / wall |
| Warranty | 5 Years |
Overview
About the HMS-HDM-F164SPp
Experience high performance with the Layer 2+ Managed Industrial Ethernet Switch, designed specifically for demanding industrial environments. Engineered for exceptional stability and reliability, this switch ensures seamless Ethernet transmission in factories, outdoor settings, and harsh conditions, while delivering advanced management features for optimal network control.
It integrates a dual power input design to ensure uninterrupted connectivity. Enclosed in a rugged IP40-rated housing that can be easily mounted on DIN rails or walls, it excels in harsh settings where durability and uptime are critical, with an operating temperature range of -40 to 75°C.
Features
Main features
- 16x 10/100/1000BASE-T Gigabit Ethernet RJ45
- 4x 100/1000BASE-X SFP slots
- IEEE 802.3af/at Power over Ethernet on ports 1-16
- Full gigabit L2+ management via CLI / WebGUI / NMS
- Redundant industrial network with STP/RSTP/MSTP/ERPSv2
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
- Traffic classification based on IEEE 802.1p, CoS, WRR, and strict mode
- SNMPv1/v2c/v3 for different levels of network management
- Wide operating temperature range −40 to 75℃ (−40 to 167℉)
- All-aluminum case, compact and fanless design
Specifications
Technical specifications
Hardware
| Copper Ports | 16x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X (port 1-16) |
|---|---|
| Fiber Ports | 4x 100/1000BASE-X SFP slots (port 17-20) |
| Console | 1x RJ45-to-RS232 serial port (115200) |
| Connector | 1 removable 6-contact terminal block; pin 1/3 for power 1, pin 4/6 for power 2 |
| Alarm | One relay output for power failure, 1A @ 24V DC |
| RAM / Flash | 128 MByte / 32 MByte |
| Reset Button | < 5 sec: system reboot; > 10 sec: factory default |
| Surge Protection | ±6kV DC, ±4kV RJ45 |
| Enclosure | IP40 aluminum case |
| Installation | DIN-Rail and wall-mount |
| Dimension | 160 x 132 x 70mm |
| Weight | 1000g (bare), 1300g (with package) |
Switching
| Switch Architecture | Store-and-Forward |
|---|---|
| Switch Fabric | 56Gbps / non-blocking |
| Forwarding Rate | 29.76Mpps (64-byte packet size) |
| Packet Buffer Size | 4 Mbits |
| Maximum Packet Length | 10K bytes |
| MAC Address Table | 8K entries, automatic source address learning and aging |
| Flow Control | IEEE 802.3x pause frame for full duplex, back pressure for half duplex |
PoE & Power Supply
| PoE Ports | Port 1 to 16, IEEE 802.3 af/at |
|---|---|
| PoE Power Supply Type | End-span |
| Power Supply Pin | 1/2(+), 3/6(-) |
| Max Power Per Port | 30W |
| Input Voltage | DC48-56V |
| Power Consumption | 15 Watts max (without PoE load) |
| PoE Power Budget | 240W maximum (depending on power input) |
Environmental
| Operating Temperature | -40℃ ~ 75℃ (-40 to 167℉) |
|---|---|
| Storage Temperature | -40℃ ~ 85℃ (-40 to 185℉) |
| Operating Humidity | 5% ~ 95% (non-condensing) |
| MTBF | 907,476 hours @ Telcordia SR-332 |
| Heat Dissipation | 65 BTU/h (non-PoE mode); 1054 BTU/h (with 240W PoE load) |
| Cooling | Passive cooling, fanless design |
| Noise Level | 0 dBA |
Software Features
| Port Configuration | Admin status, auto-negotiation 10/100/1000Mbps, fiber 100M/1000M speed selection, flow control, EEE, port description |
|---|---|
| Port Mirroring | Source ingress / egress port / both, many-to-1 monitor |
| VLAN | Up to 4K VLAN groups out of 4094 VLAN IDs; IEEE 802.1Q; IEEE 802.1AD Q-in-Q; GVRP |
| Link Aggregation | IEEE 802.3ad LACP / static trunk; 6 trunk groups with 4 ports per trunk |
| Spanning Tree | IEEE 802.1D STP, 802.1w RSTP, 802.1s MSTP |
| Multicast | Dynamic/static multicast groups; IGMP snooping v1/2/3; fast leave; IGMP querier |
| Rate Limitation | Per port; ingress/egress 16-1000000 kbps |
| Ring | ITU-T G.8032 ERPS, recovery time < 10ms |
| QoS | Strict priority and WRR; 8-level priority by port, 802.1p, 802.1Q VLAN tag, DSCP/TOS |
| ACL | IP-based / MAC-based ACL by MAC, IP, Ethertype, protocol, VLAN ID, DSCP, 802.1p |
| Security | Port security, static MAC, IEEE 802.1x, RADIUS, DHCP snooping, DHCP option 82 |
| PoE Management | Port status monitoring, total budget control, usage & temperature thresholds, port priority, PoE/PoE+/PoE++ mode, PD reboot, absolute/periodic schedule |
| Layer 3 | Max. 8 VLAN interfaces; max. 32 routing entries; IPv4 software static routing |
| Management | Console, Telnet, Web, SNMPv1/v2c; secure SSHv2, TLSv1.2, SNMPv3; HTTP firmware upgrade and config backup; syslog; LLDP; SNTP; alarms (relay, LED, temperature, trap, power) |
Regulatory & Warranty
| ISO | Manufactured in ISO-9001 facility |
|---|---|
| Safety | IEC 62368-1:2020 + A11:2020 |
| EMI | FCC Part 15B Class A, IEC 61000-3-2 |
| EMS | IEC 61000-4-2 ESD: Contact ±8kV, Air ±15kV; IEC 61000-4-5 Surge: Power ±6kV, RJ45 ±4kV/±6kV (PoE) |
| Shock / Free Fall / Vibration | IEC 60068-2-27 / IEC 60068-2-32 / IEC 60068-2-6 |
| Environmental | RoHS 2011/65/EU Annex II (EU) |
| Warranty | 5 Years |
Ordering
Ordering information
| Model | 10/100/1000Base-T RJ45 | 100/1000Base-X SFP | PoE Standard | Input Voltage | Operating Temp. |
|---|---|---|---|---|---|
| HMS-HDM-F164SPp | 16 | 4 | Port 1-16 802.3 af/at | 2x DC9-56V | -40 to +75℃ |
Package
In the box
- 1 x Industrial Ethernet Switch
- 1 x DB9 female to RJ45 cable
- 1 x DIN-Rail clip
- 2 x Wall-mount kits
- Quick installation guide, warranty card, product notice
PDF
HMS-HDM-F164SPp datasheetPDF · 6 pages · 390 KB · Full specifications, dimensions and ordering codes
Download PDFDue to continuous improvement, all product specifications are subject to change without further notice.
Ready to specify?
Our Singapore team will confirm the right specification for your application — at no charge.