HMS-HRM-F244SPp9 — L2+ Managed 24-port 10/100/1000Base-TX (PoE++) + 4-port 10/100/1000Base-TX or 100/1000Base-SFP Combo Ethernet Switch

Managed Network Switches — HMS-HRM-F244SPp9

HMS-HRM-F244SPp9 — L2+ Managed 24-port 10/100/1000Base-TX (PoE++) + 4-port 10/100/1000Base-TX or 100/1000Base-SFP Combo Ethernet Switch

1U rack-mount, IEEE 802.3af/at/bt PoE++ up to 90W per port, AC power input

HMS-HRM-F244SPp9L2+PoE++90W per portCombo portsRack-mount

Key facts

HMS-HRM-F244SPp9 at a glance

ModelHMS-HRM-F244SPp9
CategoryManaged Network Switches
Ports24x Gigabit RJ45 (PoE++) + 4x combo TX/SFP
PoEIEEE 802.3af/at/bt, 90W per port, 785W budget (1485W optional)
Switching56Gbps fabric, L2+ managed
RingITU-T G.8032 ERPS, < 10ms
PowerAC 100-240V
Form factor19" 1U rack-mount or desktop

Overview

About the HMS-HRM-F244SPp9

The Layer 2 Managed Ethernet Switch delivers advanced networking control with full Gigabit Layer 2 management, enabling efficient traffic handling, VLAN segmentation, QoS prioritization, and robust security features. Designed for scalability, it offers flexible management via CLI, WebGUI, or NMS, simplifying configuration and monitoring for IT administrators.

With IEEE 802.3af/at/bt PoE support, this switch powers high-demand devices such as IP cameras, wireless access points, and VoIP phones while maintaining reliable performance. With features like port mirroring, STP/RSTP and IGMP snooping, it provides a high-performance, future-proof networking solution.

Features

Main features

  • 24x 10/100/1000BASE-T Gigabit Ethernet RJ45
  • 4x 100/1000BASE-X SFP and 4x 10/100/1000BASE-T RJ45 combo ports
  • IEEE 802.3af/at/bt Power over Ethernet on ports 1-24
  • Web management mode for easy installation and debugging
  • Redundant network topology with STP/RSTP/MSTP/ERPSv2
  • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
  • Priority retagging and flow classification based on VLAN, MAC, source/destination address, IP or priority
  • SNMP and NMS management for equipment discovery, topology, configuration, performance and fault management

Specifications

Technical specifications

Hardware

Copper Ports24x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X (port 1-24)
Combo Ports4x 100/1000BASE-X SFP slots (port 25-28) / 4x 10/100/1000BASE-T RJ45
Console1x RJ45-to-RS232 serial port (115200)
RAM / Flash128 MByte / 32 MByte
Reset Button< 5 sec: system reboot; > 10 sec: factory default
Surge Protection±4kV DC, ±6kV RJ45
EnclosureIP30 metal
Installation19 inch rack mount or desktop
Dimension440mm x 300mm x 45mm

Switching

Switch ArchitectureStore-and-Forward
Switch Fabric56Gbps / non-blocking
Forwarding Rate41.66Mpps (64-byte packet size)
Packet Buffer Size4 Mbits
Maximum Packet Length10K bytes
MAC Address Table8K entries, automatic source address learning and aging
Flow ControlIEEE 802.3x pause frame for full duplex, back pressure for half duplex

Power Supply & PoE

Power Input1
Input VoltageAC 100-240V, 50/60Hz 0.15A
Power Consumption15 Watts max (without PoE load)
PoE PortsPort 1 to 24, IEEE 802.3 af/at/bt
PoE Power Supply TypeEnd-span
Power Supply Pin1/2(+), 3/6(-) or 4/5(+), 7/8(-)
Max Power Per Port90W
PoE Power Budget785W (default); 1485W (optional)

Environmental

Operating Temperature0℃ to 50℃
Storage Temperature-20℃ to 70℃
Operating Humidity5% ~ 95% (non-condensing)
MTBF126,424 hours (PoE models) @ MIL-HDBK-217F GB
Heat Dissipation102 BTU/h (non-PoE mode); 1672 BTU/h (with max PoE load)
CoolingPassive cooling, fanless design
Noise Level0 dBA

Software Features

Port ConfigurationAdmin status, auto-negotiation 10/100/1000Mbps, fiber 100M/1000M speed selection, flow control, EEE, port description
Port MirroringSource ingress / egress port / both, many-to-1 monitor
VLANUp to 4K VLAN groups out of 4094 VLAN IDs; IEEE 802.1Q; IEEE 802.1AD Q-in-Q; GVRP
Link AggregationIEEE 802.3ad LACP / static trunk; 6 trunk groups with 4 ports per trunk
Spanning TreeIEEE 802.1D STP, 802.1w RSTP, 802.1s MSTP
MulticastDynamic/static multicast groups; IGMP snooping v1/2/3; fast leave; IGMP querier
Rate LimitationPer port; ingress/egress 16-1000000 kbps
RingITU-T G.8032 ERPS, recovery time < 10ms
QoSStrict priority and WRR; 8-level priority by port, 802.1p, 802.1Q VLAN tag, DSCP/TOS
ACLIP-based / MAC-based ACL by MAC, IP, Ethertype, protocol, VLAN ID, DSCP, 802.1p
SecurityPort security, static MAC, IEEE 802.1x, RADIUS, DHCP snooping, DHCP option 82
PoE ManagementPort status monitoring, total budget control, usage & temperature thresholds, port priority, PoE/PoE+/PoE++ mode, PD reboot, absolute/periodic schedule
Layer 3Max. 8 VLAN interfaces; max. 32 routing entries; IPv4 software static routing
ManagementConsole, Telnet, Web, SNMPv1/v2c; secure SSHv2, TLSv1.2, SNMPv3; HTTP firmware upgrade and config backup; syslog; LLDP; SNTP; alarms (relay, LED, temperature, trap, power)

Regulatory & Warranty

ISOManufactured in ISO-9001 facility
SafetyIEC 62368-1:2020 + A11:2020
EMIFCC Part 15B Class A, IEC 61000-3-2
EMSIEC 61000-4-2 ESD: Contact ±8kV, Air ±15kV; IEC 61000-4-5 Surge: Power ±6kV, RJ45 ±4kV/±6kV (PoE)
EnvironmentalRoHS 2011/65/EU Annex II (EU)
Warranty1 Year

Shipping

Classification CodesHS Code: 851762; HTS: 8517.62.00
NDAA CompliantYes
Individual Gross Weight4.95kg
Individual Package Dimension495 x 393 x 80mm

Ordering

Ordering information

ModelDescriptionInput VoltageOperating Temp.
HMS-HRM-F244SPp9L2+ Managed 24-port 10/100/1000Base-TX (PoE++) + 4-port 10/100/1000Base-TX or 100/1000Base-SFP Combo Ethernet Switch with AC Power Input, 1U Rack-mountAC100-240V0 ℃ to 50 ℃

Package

In the box

  • 1 x Ethernet switch
  • 1 x DB9 female to RJ45 10-pin cable
  • AC power cable (regional power plug)
  • 2 x Rack-mount kits
  • Quick start guide and warranty card
PDF
HMS-HRM-F244SPp9 datasheetPDF · 6 pages · 425 KB · Full specifications, dimensions and ordering codes
Download PDF

Due to continuous improvement, all product specifications are subject to change without further notice.

Ready to specify?

Our Singapore team will confirm the right specification for your application — at no charge.