HUS-HDM-F82S
Hardened Grade Unmanaged 8-port 10/100/1000Base-TX + 2-port 1000Base-SFP Ethernet Switch with Redundant DC Power Inputs
Main Features -
Fault Alarm (via electric relay)
-
The built-in fault alarm function sends out alert via the electric relay when there’s fault on the network switch.
-
It helps measure performance and quickly find out anomalies of the network switch.
​
​
​
​
​
​
​​
​
​
​
​
​
​
​
​
​
​
Dual Power Input for High Reliability
-
Automatically switch to secondary power input when primary power input fails, ensuring continuous operation without down time.
-
Redundant power supply reduces possibility of single-point-of-failure.
​
Environmentally Hardened Design
-
With a compact metal housing with an IP40 rating
-
Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations.
-
Extended ambient operating temperature range: -40 ÌŠ C to +75 ÌŠ C
Other Features -
-
8 10/100/1000Base-TX + 2 1000Base-SFP
-
Supports IEEE802.3az energy-saving technology
-
Supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX
-
9K Bytes Jumbo Frame
-
Supports Broadcast Storm Control
-
Supports 802.3x Flow control
-
10/100/1000Mbps RJ45 Port
-
Supports external 1000Base-SFP
-
2M bits frame buffer memory
-
Supports Wall-mount and DIN-Rail installation
Frequently Asked Question (FAQ)
1. What is the maximum power output for each PoE port?
-
Each of the 8 Ethernet ports supports IEEE 802.3at PoE+, delivering up to 30W per port.
2. Are the fiber ports uplink-only or can they function in both directions?
-
The 100Base-FX SFP ports serve as uplinks for long-distance transmission, typically to aggregation switches or core network nodes.
3. Is the switch suitable for industrial environments?
-
Yes, the HUS-HDM-F82S supports DIN-rail mounting, surge protection, and an extended temperature range, making it ideal for outdoor and industrial deployment.
4. Does it require any configuration?
-
No, it is a fully plug-and-play unmanaged switch. No software or setup is required.